deoxidizing
英
美
网络 脱氧; 去氧
双语例句
- Development of non-aluminium deoxidizing technology for rail steel
重轨钢非铝脱氧工艺研究 - Pig iron containing manganese; used as a deoxidizing agent and to raise the manganese content in making steel.
含有锰的生铁，用作除氧剂，用在制钢时提高锰的含量。 - The separation process about deoxidizing stove tail gas in the modified siemens arts and crafts in polycrystalline silicon production was improved.
对改良西门子法多晶硅生产中尾气分离工艺进行了改进。 - We applied the thermodynamic principle to analyze the thermodynamic condition for deoxidizing the oxide of Si-Mn. According to our result, we designed a new technigue, the surface of water-atomized Si-Mn steel powder deoxidized in pure N2 with thermoset resin.
本文用热力学原理分析了Si-Mn氧化物还原的热力学条件，并根据其热力学分析结果，对水雾化Si-Mn钢粉采用热塑性树脂涂层，在高纯氮气氛中进行脱氧的新工艺研究。 - Titanium powders produced by deoxidizing TiO2 directly is the mainstream, if we can empolder a kind of more simple and lower cost method to produce Titanium powders, it will certainly stimulate the development of Titanium production industry.
采用TiO2直接还原法生产钛粉已经成为生产钛粉的主要研究方法，如果能开发出更简单、成本更低的方法必将极大地促进钛粉生产行业的发展。 - The technology of aluminium deoxidizing and alloying has been studied. That is, after preliminary argon blowing and oxygen detecting for the aluminum containing steel, determine the feeding amount of aluminium according to the oxygen content in steel and then reblow argon.
对含铝钢经预吹氩定氧后，根据钢中氧含量确定加铝量，再补吹氩的铝脱氧合金化工艺进行研究和探索。 - The results of this study are significant for the use, deactivation and reactivation of Co-Mo/ γ-Al2O3 deoxidizing catalyst.
研究结果对Co-Mo/γ-Al2O3非贵金属耐硫脱氧催化剂的使用、失活和再生有重要的意义。 - Preparation of high-concentration sulfur dioxide from deoxidizing phosphogypsum with compound reducing agent
硫脲作还原剂制备二氧化锰及其电化学性能复合还原剂还原分解磷石膏制取高浓度二氧化硫 - The size of deoxidizing products increases with the increased degree of supersaturation of deoxidizing elements;
脱氧产物尺寸随脱氧元素过饱和度增加而增加； - The composition of the secondly and thirdly deoxidizing products can be controlled through controlling the content of aluminum and calcium of the strong deoxidizing elements, making them have good distortion ability in hot work.
二次和三次脱氧产物的成分可以通过控制钢液中强脱氧元素铝和钙的含量来控制，使它们具有良好的热加工变形能力。